More Than Record Storage
Our striking looking Ambrosia maple shelves, tops and accessories provide attractive storage for music/movie collections as well as elegant and flexible modular furniture for myriad other uses. Every module is handcrafted with pride from old-growth, kiln-dried Ambrosia maple finished in clear satin lacquer to match our air-dried maple platforms, speaker stands and SAMSON racks.
Three LP Module Styles
Each maple LP module holds +/- 150 standard albums. Our interlocking construction allows them to stack freestanding up to six high. Taller stacks may need to have their top shelf anchored to a wall. We offer three module styles for LP storage:
ORIGINAL MAPLE LP MODULES are our least-expensive maple storage shelf. These modules are available with an optional slide-in birch overlay to accommodate smaller-than-LP-size vinyl.
MAPLE ARTISAN LP MODULES are designed to enhance interior decor. These LP modules include a flush inset base inlay in beautifully contrasting Blond, Cherry and Walnut finishes. Also available with matching flush top inlay.
MAPLE HEIRLOOM LP MODULES are our premium shelves for vinyl storage. These modules feature a 3/4" solid Ambrosia maple bottoms that supports any record size and offer myriad other functional storage possibilities.
Shelves for CDs, DVDs, Blu-Rays & 7" vinyl
We offer MEDIA SHELF MODULES in two identical height versions:
3-TIER MEDIA SHELF MODULES for CDs each hold 177 standard discs.
2-TIER MEDIA SHELF MODULES are for 7" records and all other standard optical media including Blu-Rays, DVDs, SACDs, PlayStation, xBox, and PC game discs. Each module holds +/- 220 45s, 100 BluRays, or 82 DVDs.
We offer PASS-THRU MODULES with 9" & 13" internal heights for lots of uses:
9" PASS-THRU MODULES are 10-1/2" tall, 4" shorter than LP shelves. They can be used with Tops and Bases to create 24"- 38" tall Side Tables or intermixed with full-height modules for more variations. Within stacks of shelves, these modules can create a handy place to keep accessories and are large enough to hold most standard-size components.
13" PASS-THRU MODULES are 14-1/2" tall, the same height as our LP modules. They can be used to create taller Side Tables and nicely accommodate a stacks of old and treasured electronics. These modules are high enough to accommodate our 2" or 4" Vibration Control Kits for a phono pre-amp or integrated amp when mounting a turntable on top of LP shelves.
Tops, Bases & Accessories
We offer a carefully thought-out selection of add-on accessories that can transform stacks of LP and CDs into attractive and functional furniture. Use solid Top and Base options to elevate any stack of shelves into a small table, handsome shelving, or rolling cart:
MAPLE FITTED TOPS only increase height by 3/4" and are significantly more rigid when mounting a turntable or other component on top of stacked shelves.
MAPLE PEDESTAL TOPS offer a slightly larger surface area and adds about 3-1/4" height to any stack. Pair with a Toe-Kick Base to create handsome varying height Side Tables and free standing shelves for storage and display.
MAPLE TOE-KICK BASES are for stationary stacks. They interlock with any LP or Pass-Thru module and back-to-back Media Shelves. They raise the lowest shelf about 2-1/2" off the floor.
MAPLE CASTER BASES are rated to carry up to 660 lbs, 50% more than the full weight of six loaded record shelves. Easy and convenient to move on either carpeted or bare floors, this base raises the bottom shelf by 4 1/4".
MAPLE MEDIA SHELF BASES raises the lowest shelf about 1-1/2" off the floor. The bevelled front of the base extends forward slightly to improve stability for taller stacks mounted on plush carpet.
MAPLE MEDIA INSERTs adapt our LP shelves to store CDs.
WALNUT STAINED 1/4" OVERLAYS are a ready-to-use, solid bottom plate that can be easily added to Original LP modules. Also available Unfinished.